Assessment of volatile organic compound removal by indoor plants—a novel experimental setup

Indoor plants can remove volatile organic compounds (VOCs) from the air. The majority of knowledge comes from laboratory studies where results cannot directly be transferred to real-life settings. The aim of this study was to develop an experimental test system to assess VOC removal by indoor plants which allows for an improved real-life simulation. Parameters such as relative humidity, air exchange rate and VOC concentration are controlled and can be varied to simulate different real-life settings. For example, toluene diffusion through a needle gave concentrations in the range of 0.10–2.35 μg/L with deviations from theoretical values of 3.2–10.5 %. Overall, the system proved to be functional for the assessment of VOC removal by indoor plants with Hedera helix reaching a toluene removal rate of up to 66.5 μg/m²/h. The mode of toluene exposure (semi-dynamic or dynamic) had a significant influence on the removal rate obtained by H. helix.     

Assessment of biogeochemical natural attenuation and treatment of chlorinated solvents, Altus Air Force Base, Altus, Oklahoma

Biogeochemical reductive dechlorination (BiRD) is a newly recognized method for the remediation or natural attenuation of chlorinated solvents. Chlorinated solvents are rapidly treated by abiotic reaction with reduced mineral iron sulfides. Iron sulfides are formed by naturally occurring sulfate-reducing bacteria when sufficient SO(4)(2-) and organic carbon are present or supplied to sediments containing mineral iron. An example of site characterization focusing on BiRD is presented focusing on mineral phases. Methods demonstrated here may be employed at other sites to evaluate naturally occurring BiRD or to evaluate an engineered BiRD remediation. A field investigation was performed at a TCE contaminated site at Altus AFB with naturally high concentrations of SO(4)(2-) and Fe(III) minerals and where an accidental fuel spill provided organic carbon. In the area of this fuel spill significant mineral iron sulfides were found, sulfate was almost completely removed, and TCE was absent. Only small amounts of daughter products were found, further indicating that the BiRD pathway was operative. Mass balance data indicates all of the remaining TCE (182 kg) could be treated by the remaining FeS (66.5 kg) in the upper aquifer; however, the FeS was not co-located with TCE to enable complete reaction. Laboratory microcosm tests with FeS amended and FeS-rich sediment from Altus AFB also suggest that BiRD is capable of destroying TCE. The results suggest that an engineered BiRD treatment is possible for this site.     

Advanced paternal age,infertility, and reproductive risks: A review of the literature

Advanced paternal age (APA) is associated with infertility and other reproductive risks. Studies looking at APA and outcomes have used different paternal age cut-offs, which has complicated systematic evaluations of reproductive risk associated with paternal aging. This review of the literature suggests that the impact of paternal aging on adverse reproductive outcomes is small, but significant. Studies suggest the incidence of paternal age effect disorders attributed to de novo autosomal dominant mutations is less than 0.5%. Other risks associated with APA include infertility, miscarriage, birth defects, poor neurodevelopmental outcomes, and childhood cancer. Although the increasing prevalence of APA has mirrored the rise in maternal age, this topic has not received similar attention. In this review, we summarize the available literature on the reproductive risks associated with APA to provide a framework for comprehensive genetic counseling and evidence-based management of APA pregnancies.     

Groundwater monitoring plans at small-scale sites--an innovative spatial and temporal methodology

An innovative methodology for improving existing groundwater monitoring plans at small-scale sites is presented. The methodology consists of three stand-alone methods: a spatial redundancy reduction method, a well-siting method for adding new sampling locations, and a sampling frequency determination method. The spatial redundancy reduction method eliminates redundant wells through an optimization process that minimizes the errors in plume delineation and the average plume concentration estimation. The well-siting method locates possible new sampling points for an inadequately delineated plume via regression analysis of plume centerline concentrations and estimation of plume dispersivity values. The sampling frequency determination method recommends the future frequency of sampling for each sampling location based on the direction, magnitude, and uncertainty of the concentration trend derived from representative historical concentration data. Although the methodology is designed for small-scale sites, it can be easily adopted for large-scale site applications. The proposed methodology is applied to a small petroleum hydrocarbon-contaminated site with a network of 12 monitoring wells to demonstrate its effectiveness and validity.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

Fuzzy input–output model for optimizing eco-industrial supply chains under water footprint constraints

Global water stress is expected to increase due to population growth, economic development and climate change. Because of this trend, there is an increased interest in the water intensity of industrial activities conducted via the product supply chain or within specified geographical boundaries or regions, both at the enterprise- or regulatory-level. The total water footprint of economic activities should be evaluated in consideration of local water resource consumption, virtual water trade and resource availability. As individual entities seek to protect their respective interests, the challenge is to optimize inter-regional trade of goods with the consideration of the interests of participants in the network. This work presents a fuzzy input–output model for optimizing supply chains under water footprint constraints. Two case studies, involving tile manufacturing and biofuel production, are considered to demonstrate the use of the model.